Cut Out Dia:70 mm. Overall Dia:73 mm. Base Dia:69 mm. Recess Depth:60 mm. Projection:28 mm. Must be earthed. Suitable for direct mounting on normally flammable surfaces.       

·          IP65 Mains voltage LED step light suitable for step and low level lighting

·          Integrated LED driver - no separate driver required

·          Aluminium body

·          Fitted with 30cm mains cable

·          Non-dimmable

·          N.B. Cut-out 58mm without mounting sleeve. 62mm with mounting sleeve

·          Suitable for indoor and outdoor use.

·          Stainless steel backplate.

·          Etched glass detail.

·          Size: (HxWxProj.) 220x60x110mm.

·          Contains 24 x white LEDs (average life 50,000 hours+).

Complete infrared security system, which is simple to install, allowing low cost monitoring of door or walkway, announcing intruder or customer. Ideal for shops, offices, warehouses and receptions.

·          Alarm or chime setting

·          Retro-reflection IR photoelectric beam sensor

·          Adjustable activation time (3-30 sec) and volume

·          Nominal detection range 7m

·          1 second duration for chime, 30 seconds for alarm

·          9V dc, 200mA power supply included

Hartland range of quality accessories on stylish 3mm super slim plates. British made. Available in Bright or Satin Stainless Steel and Black Nickel coated. Trailing Edge Multi-Way. Full Loading for Halogen. Note: Finish of picture is antique Brass 

Cut Out Dia. 112 mm.  Overall Dia. 126 mm. Base Dia. 122 mm. Recess Depth. 70 mm. Input. Suitable for direct mounting on normally flammable surfaces.

·          IP65 Mains voltage LED light suitable for stair, corridor and low level lighting

·          Integrated LED driver - no separate driver required

·          Satin silver cast aluminium faceplate

·          NON-REPLACEABLE LEDs with up to 30,000 hours life with cool operating temperature

·         Suitable for mounting in both dry lined & solid walls. (Separate mounting sleeve supplied for solid wall mounting)

·          Non-dimmable

·          N.B. Cut-out dimension refers to product when used without the plastic mounting sleeve

• Create a starry night in your bedroom, bathroom or any room in the house.
• These are typically installed in ceilings (access required above), drapes (pierce material and apply silicone to back) and tiling (tails can be installed in grout between tiles).
• 3mm diameter cut out required for bullet lens fitting.
• Lightsource needs locating near 13A power outlet.
• Separate power feed to colourwheel to allow for continuous colour change.
• Kit includes 35W tungsten halogen lightsource, Colour wheel, 112 x acrylic bullet lenses and washers, 80x0.75mm fibre optic tails, 32x1.0mm fibre optic tails (1.25mx2.0m.) and full installation instructions.

• Powerful 500W enclosed halogen floodlight with pan & tilt adjustment.
• RF technology enables remote activation of the floodlight from an RF transmitting device such as the HA12 or HA13.
• 100m receiving range in free air space.
• Up to 1500W of external incandescent lighting can be connected.
• Manual ON/OFF override. Adjustable light ON time from 1, 3, 5 & 12 minutes.
• IP44 weatherproof rating.
• Adjustable light level control.
• Total switching capability: 2000W incandescent or halogen, 500W fluorescent/low energy.
• 500W halogen lamp supplied.
• Overall Dimensions (mm)    Height 244, Width 200, Depth 224

·          To work with HA16

·          Sounds a welcome chime or perimeter alert for your home.

·          Indoor use only.

·          White finish.

• For outdoor use. Sugeested 25w lamp external and 60w internal.
• 100m lightstring.
• 100 @ BC lampholders at 1m spacing plus 3m lead.
• Plugged.
• Specify Opal lamps in notes, if required