• Floor level lighting which allows for a dazzling range of lighting effects.
• They can be installed in wooden floors, decking, paving, stair skirting, concrete and typically used as marker lights for pathways or entrances, wall washing, uplighting columns or archways and mood lighting in any room in the house including wet rooms and pool areas.
• The fittings stay cool and are safe to walk on.
• 38mm diameter cut out is required for paver fitting.
• Lightsource needs to be located near 2x13A power outlets.
• Separate power feed to colour wheel to allow for continuous colour change or static colour.
• Kit includes: 100W tungsten halogen lightsource, Colour wheel, 4x48mm stainless steel fittings, 4 x fibre optic tails (1m - 4m) and full installation instructions.

IP68 1w luxeon LED walkover light, Pre-wired with 3m rubberised cable, Submersible to a depth of 2m, 5mm toughened glass, 30 lux at 1m (white LED), Diameter: 60mm, Depth: 39mm, Hole Size required: 50mm.

Viewing angle: 45 degrees, Stainless Steel marine grade 316, 12v sealed for life, Must be wired in series, Requires an LED driver (we recommend LL348 - runs up to 16 fittings). Multi Application - Groundlight - Downlight - Docklight - Decklight - Steplight

Suitable for pool illumination and garden lighting features. 30 super bright LED's. Polycarbonate body and front cover. 6mm toughened glass. Rim dia. 120mm x 78mm. Max submersible depth 60cm. IP68. Remote external transformer required. Colour changing option (Red/Blue/Green). Needs LL195 TRANSFORMER. 

• Supplied with spike for garden lighting.
• 30 Super Bright red/green/blue (colour changing) LEDs.

Die cast aluminium body. Toughened glass diffuser. Suitable for use in damp or underwater applications to around 1m depth. Must be used with a suitable low voltage transformer (LL162). Dims: (HxWxL) 230mmx215mmx172mm. Lamp: 12V 50W MR16 supplied.

Can also be used with LL192 Next generation colour changing LED lamps

·          IP68 Subemersible 1W 316 stainless steel LED marker light. ROHS - Compliant   

·          Screw threaded body with silicon seals and hexagonal lock-nut allows fitting in bath tubs, showertrays, jacuzzi’s, etc (consult a bathroom specialist for professional installation advice)

·         Mounting surface thickness - Min. 2mm, Max 12mm.  Class 3 Equipment.  Suitable for direct mounting on normally flammable surfaces

·         Submersible to a depth of 2m.   Cut Out Dia. 26 mm.   Overerall Dia. 30mm edge to edge mm.  Glass Dia 20 mm.  Recess Depth  26 mm. 

·         NON-REPLACEABLE LEDs with up to 30,000 hours life makes fittings ideal for inaccessible locations

·         Cool operating temperature. Input Voltage 350mA V

·          Fitted with 1m of cable for connection to a Constant Current LED driver (N.B. to be wired in SERIES)

·          Non-dimmable.  Driver supports up to 9 fittings.

 12x LED’s/1w .  Needs LED driver LL405

Colours:      Stainless Steel with White LED’s

                   Stainless Steel with Blue LED’s

IP68 rated - suitable for submersion.  160mm high

For flower beds, outside wall or to illuminate shrubs. For wall mounting or ground spike. Includes spike. Waterproof IP67 rated. 230v Die cast aluminium body. Borosilicate toughened glass. Mains powered.  Lamp either mains 50w GU10 halogen or 18 LED low energy lamp. Dia. 98mm. Depth 105mm. Complete with 2m of lead.  Rear dia. 75mm if inset to Decking.

For flower beds, outside wall or to small/medium sized shrubs. For wall mounting or ground spike. Includes spike. Waterproof IP67 rated. 230v Die cast aluminium black body. Borosilicate toughened glass. Mains powered.  Built-in BRIGHT 28 LED, 45 degree flood. Dia. 98mm. Depth 105mm. Complete with 2m of lead.

• 10x30mm IP66 LED fittings in stainless steel housing.
• 12V indoor plug-in transformer with 1.8m cable.
• Deluxe ColourMaster® controller with 15m cable.
• 'Sound to Light' technology means that LEDs can be set to change colour in time with music, beats or clapping.
• Also ice settings LEDs glow a constant ice white colour.
• Remote control.
• Size: (HxDia.) 26x30mm.

• 4x30mm IP66 LED fittings in plastic housing with stainless steel trim.
• 12V indoor plug-in transformer with 1.8m cable.
• ColourMaster® controller with 15m cable.
• Transformer supplied can power a maximum of 10 LED lights per kit.
• Size: (HxDia.) 30x30mm.

COLOUR CHANGING using remote control LL297.  High powered 5w MR16 LED Lamp. Low Energy. Long Life. Ideal for Domestic or Commercial Installations.  BEAM ANGLE: 60 degrees. INPUT POWER: 100-240V AC 50/60Hz. No UV or IR radiation. Over 20,000 hours. Diameter:49.7mm Length:46mm. DRIVER REQUIRED: LL405

SIMULTANEOUS COLOUR CHANGING using remote control LL297. These new MR16 intelligent lamps introduce a colour changing scheme to any installation.  Install a single master lamp and up to thirty two slaves.  Point the remote control (LL297) at the master lamp and change the colour of the master and slaves simultaneously.  Four different colour changing scenes with all of the lamps changing smoothly through the colour spectrum.  Watch them strobe, flash or fade at the same time!

Adjust the light intensity to four different levels.  Press one of the sixteen different colour buttons and instantly change the mood of your environment.  Built in wiring looms attached to each lamp.  Ideal for bars, restaurants, night clubs, stores, commercial premises, and also looks great in domestic homes.

Length 52mm Diameter 50mm.   5w Cree LED.  Colour changing MR16
Beam angle 60º .  4 colour changing programs
2 flash & 2 smooth changes, 16 preset colours
Can be wired up to 32 Slave Units.   Requires LED driver LL405.   Max: 80m between lamps

Ideal for commercial installations, Night Clubs, Discos, Wine Bars, Parties, Outdoor Lighting, mood creating interior lighting, even childrens bedrooms. Unit has 12 preset colours – red, green, blue, purple, pink, white etc.

On-off button.  Lock-unlock button

4 light intensity buttons.   12 preset colour buttons

This infra-red control comes with 4 pre-set colour changing modes – Flash (changes colour every second); Strobe (every 5 seconds); Fade (quick change through the entire 16 colour spectrum); and Smooth (slow change through the spectrum). It can be used to programme / control any number GU10 colour changing LED lamps.  Requires 2 x AAA batteries

LED Driver designed for use with LL292. Input 100v-240v. Output 12v 20w. Will drive up to 4 of LL292’s Tristar Lamps. Must be wired in parallel. Non dimmable.  IP66 Waterproof rated

Length: 117mm. Width: 33m. Height: 19mm

CAN BE USED WITH LL292 REMOTE COLOUR CHANGING LED LAMPS. Marine Grade 316 Stainless Steel Spike Light. IP65. Supplied with 2.5mm rubberised cable. 

Lamp: MR16 12v 50mm (not included). Requires a waterproof IP67 rated transformer, we recommend LL393. Requires an LED driver(LL405) if LED lamps are used

Diameter: 62mm. Depth: 87mm.  Spike length: 152mm. 90 Degree tilt angle

CAN BE USED WITH LL292 REMOTE COLOUR CHANGING LED LAMPS. Marine Grade 316 Stainless Steel Garden Wall Light. IP65. Complete with 2.5mm rubberised cable. 

Lamp: MR16 12v 50mm GX5.3 35w max (not included). Requires a waterproof IP67 rated transformer, we recommend LL393. Requires an LED driver LL405 if LED lamps are used

Diameter: 62mm. Body Length: 97mm. Base Diameter: 77mm

CAN BE USED WITH LL292,LL293, LL168 REMOTE COLOUR CHANGING LED LAMPS. Waterproof downlight suitable for a number of applications in the garden, patio, house eaves, ponds, bathrooms, pubs, clubs etc. These fittings can take the latest technology Tristar LED lamps both mains and low-voltage. Supports fully synchronised lamps.

• Aluminium construction - resists warping and dissipates heat efficiently
• Fully earthed with large connection terminals for easy loop connection
• Dual usage Mains and Low Voltage(Needs transformer)
• Supplied with frosted and opal glass
• Waterproof rated IP65
• Dimeter 82mm. Height 50mm.  Cut-out 67mm

For flower beds, outside wall or to light small/medium sized shrubs, water features. For wall mounting or ground spike. Includes spike. Waterproof IP67 rated. Die cast aluminium black body. Borosilicate toughened glass. Lamp either low voltage dichroic lamp or LL292 next generation lamp. Dia. 98mm. Depth 105mm. Complete with 2m of lead.

Colour: Stainless Steel

Needs LL175 Remote Control unit and Transformer LL405.